Kingston FURY Renegade RGB 32GB (2 x 16GB) DDR5 7200mhz Desktop Memory

KF572C38RSAK2-32
32GB (16GB 2G x 64-Bit x 2 pcs.)
DDR5-7200 CL38 288-Pin DIMM Kit
Continued >>
FEATURES

• Engineered to maximise performance

• Tap into extreme overclocking potential

• Intel^® XMP 3.0 Certified

• Qualified by the world’s leading motherboard manufacturers²

• Aggressive aluminium heat spreader design

Dynamic RGB lighting and aggressive heat spreader design

Bring your system to life with 18 preset RGB lighting² effects utilising Kingston FURY CTRL or the motherboard manufacturer’s RGB software with the sleek newly designed black and silver or white and silver aluminium heat spreaders with black PCB.

 

 

Patented Kingston FURY Infrared Sync Technology^™

Ensure your RGB lighting effects stay in perfect lock-step with Kingston’s patented Infrared Sync Technology.

 

Engineered to maximise performance

With UDIMM speeds of up to 8000MT/s and CUDIMM speed of 8800MT/s¹, Kingston FURY Renegade DDR5 RGB features enhanced overclocking performance with improved stability at higher speeds for AI PC workloads and other rigorous computing demands.

Tap into extreme overclocking potential

DDR5 ushers in a whole new era of memory technology to make extreme overclocking a more stable option than previous generations. On-die ECC delivers more reliable DRAM components, an on-board PMIC balances power when and where it’s needed, and two independent 32-bit subchannels provide dramatic increases in data efficiency for multi-core processors.

Intel^® XMP 3.0 Certified

Intel Extreme Memory Profile technology makes overclocking a breeze with advanced pre-optimised factory timings, speeds and voltages for overclocking performance. Renegade DDR5 RGB features a programmable PMIC for XMP 3.0, supporting up to two customisable profiles to optimise your own unique timings, speeds and voltages saved directly to the DIMM.

 

Kingston FURY Renegade RGB 32GB (2 x 16GB) DDR5 7200mhz Desktop Memory KF572C38RSAK2-32

is a kit of two 2G x 64-bit

(16GB) DDR5-7200 CL38 SDRAM (Synchronous DRAM) 1Rx8,
memory module, based on eight 2G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 3.0. Total kit capacity is 32GB. Each
module has been tested to run at DDR5-7200 at a low latency timing
of 38-44-44 at 1.45V. The SPDs are programmed to JEDEC
standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Each 288-pin DIMM uses gold contact fingers. The JEDEC
standard electrical and mechanical specifications are as
follows:
CL(IDD)
Row Cycle Time (tRCmin)
Refresh to Active/Refresh
Command Time (tRFCmin)
Row Active Time (tRASmin)
UL Rating
Operating Temperature
Storage Temperature
40 cycles
48ns(min.)
295ns(min.)
32ns(min.)
94 V – 0
0o
C to +85o
C
-55o
C to +100o
C
FACTORY TIMING PARAMETERS
• Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
• XMP Profile #1: DDR5-7200 CL38-44-44 @1.45V
• XMP Profile #2: DDR5-6800 CL36-42-42 @1.4V
• XMP Profile #3: DDR5-6400 CL32-39-39 @1.4V
• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.73” (44.00mm), w/heatsink
Document No. 4810661B 08/05/25 Page 1 kingston.com
Memory Module Specifications
MODULE DIMENSIONS
MODULE WITH HEAT SPREADER
continued
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at
the published Kingston FURY memory speeds and timing settings. Kingston does not recommend that any user attempt to run their
computers faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components